Virgin and Recycle TPU Raw Material / TPU Resin / TPU Granule for Film

Specifications:TPU granules, hardness, including: 80A/85A/90A/95A.Features:Normally including two categories: Polyester and polyether.Hardness Shore 60A-72D.Performance:FDA certification;Non-toxic, anti-wear ability (more wear than the POM and nylon), soft, high, silence, similar than the hardness of the rubber has a higher modu

Featured Products


Virgin and Recycle TPU Raw Material / TPU Resin / TPU Granule for Film

Specifications:
TPU granules, hardness, including: 80A/85A/90A/95A.

Features:
Normally including two categories: Polyester and polyether.
Hardness Shore 60A-72D.

Performance:
FDA certification;
Non-toxic, anti-wear ability (more wear than the POM and nylon), soft, high, silence, similar than the hardness of the rubber has a higher modulus of elasticity;
Good resistance to oil, hydrolysis, anti-UV (ozone), small swelling in non polarity solvent and fuel;
Good weather resistance (low temperature flexibility), without plasticizer; It can be dyed with good air permeability and moisture permeability;
TPU thermoplastic elastomers, high tension, high tensile, tough wear-resistant characteristics of aging, as strong of fiber products.

Processing methods:
Suitable for injection molding, blow molding and extrusion molding and other processing methods.

Application:
For all types of products such as shoes, industrial casters, hose, cable sheathing, film, advanced accessories, medical equipment and sports equipment.


Physical Properties
Testing
method
 
unit
E480AE485AE490AE495AE498AE464DE472D
 
Specific Gravity
 
 

 
1.21 ± 0.021.22 ± 0.021.22 ± 0.021.22 ± 0.021.23 ± 0.021.24 ± 0.021.25 ± 0.02
 
Hardness

 
ShoreA
ShoreD
80 ± 385 ± 390 ± 395 ± 3 
55 ± 3
 
64 ± 3
 
72 ± 3
 
100!%Modulus

 
Kg/cm2507090110150180220
 
Tensiles Strength

 
Kg/cm2350380400450450500550
 
Elongation at break

 
0/0500450450420400350320
 
Tear Strength

 
Kg/cm28595105125150180200
70 degree permanence
Compression Set

 
0/03235384045
 

 
 
Abrasion Loss

 
Mg30323540506060
PolyolPolyester ( Normal Polyester )   Anti-Temperature : -30 degree  -80 degree 
Testing Condition   Pull Strength Testing: extruding and forming 2mm trial sheet, after 100degree *16 heating and then testing.
Abrasion: Tober abrasion Wheel H-22, Weight 1kgs, Turning 1000 Circles 
*Above data just for Reference.   

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours